| Last Modified: 11-29-2007 | 1.6 D | |
| Service Category: Vehicle Exterior | Section: Door/Hatch | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002CMF00AX |
| Title: DOOR / HATCH: POWER BACK DOOR SYSTEM: CUSTOMIZE PARAMETERS (2008 Sequoia) | ||
CUSTOMIZE PARAMETERS
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
1. CUSTOMIZE
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting /
(e) Select the setting by referring to the table below.
Power Back Door System
|
Display (Item) |
Default |
Function |
Setting |
|---|---|---|---|
|
PBD SW Operation |
0.8 s |
Function that turns power back door closer switch ON when switch is pushed once or held down for 0.8 sec. |
0.8s / ON |
|
PBD Buzzer |
ON |
This function makes the power back door buzzer sound when power back door is operating |
ON/OFF |
|
Wirels PBD SW Operation |
0.8 s |
Function that operates power back door when transmitter switch is pressed in specified way |
1 Oper / 2 Oper / 0.8 s / OFF / 1 Motion |
|
|